Logical matrix

A logical matrix, binary matrix, relation matrix, Boolean matrix, or (0, 1)-matrix is a matrix with entries from the Boolean domain $B = {0, 1}.$ Such a matrix can be used to represent a binary relation between a pair of finite sets. It is an important tool in combinatorial mathematics and theoretical computer science.

Matrix representation of a relation

If R is a binary relation between the finite indexed sets X and Y (so $R \subseteq X \times Y$ ), then R can be represented by the logical matrix M whose row and column indices index the elements of X and Y, respectively, such that the entries of M are defined by

m_{i,j}={\begin{cases}1&(x_{i},y_{j})\in R,\\0&(x_{i},y_{j})\not \in R.\end{cases}}

In order to designate the row and column numbers of the matrix, the sets X and Y are indexed with positive integers: i ranges from 1 to the cardinality (size) of X, and j ranges from 1 to the cardinality of Y. See the article on indexed sets for more detail.

Example

The binary relation R on the set ${1, 2, 3, 4}$ is defined so that aRb holds if and only if a divides b evenly, with no remainder. For example, 2R4 holds because 2 divides 4 without leaving a remainder, but 3R4 does not hold because when 3 divides 4, there is a remainder of 1. The following set is the set of pairs for which the relation R holds.

{(1, 1), (1, 2), (1, 3), (1, 4), (2, 2), (2, 4), (3, 3), (4, 4)}.

The corresponding representation as a logical matrix is

{\begin{pmatrix}1&1&1&1\\0&1&0&1\\0&0&1&0\\0&0&0&1\end{pmatrix}},

which includes a diagonal of ones, since each number divides itself.

Other examples

A permutation matrix is a (0, 1)-matrix, all of whose columns and rows each have exactly one nonzero element.
- A Costas array is a special case of a permutation matrix.
An incidence matrix in combinatorics and finite geometry has ones to indicate incidence between points (or vertices) and lines of a geometry, blocks of a block design, or edges of a graph.
A design matrix in analysis of variance is a (0, 1)-matrix with constant row sums.
A logical matrix may represent an adjacency matrix in graph theory: non-symmetric matrices correspond to directed graphs, symmetric matrices to ordinary graphs, and a 1 on the diagonal corresponds to a loop at the corresponding vertex.
The biadjacency matrix of a simple, undirected bipartite graph is a (0, 1)-matrix, and any (0, 1)-matrix arises in this way.
The prime factors of a list of m square-free, n-smooth numbers can be described as an m × π(n) (0, 1)-matrix, where π is the prime-counting function, and a_ij is 1 if and only if the jth prime divides the ith number. This representation is useful in the quadratic sieve factoring algorithm.
A bitmap image containing pixels in only two colors can be represented as a (0, 1)-matrix in which the zeros represent pixels of one color and the ones represent pixels of the other color.
A binary matrix can be used to check the game rules in the game of Go.^[1]
The four valued logic of two bits, transformed by 2x2 logical matrices, forms a transition system.
A recurrence plot and its variants are matrices that shows which pairs of points are closer than a certain vicinity threshold in a phase space.

Some properties

The matrix representation of the equality relation on a finite set is the identity matrix I, that is, the matrix whose entries on the diagonal are all 1, while the others are all 0. More generally, if relation R satisfies $I \subseteq R,$ then R is a reflexive relation.

If the Boolean domain is viewed as a semiring, where addition corresponds to logical OR and multiplication to logical AND, the matrix representation of the composition of two relations is equal to the matrix product of the matrix representations of these relations. This product can be computed in expected time O(n²).^[2]

Frequently, operations on binary matrices are defined in terms of modular arithmetic mod 2—that is, the elements are treated as elements of the Galois field ${\mathbf {GF}}(2)=\mathbb {Z} _{2}$ . They arise in a variety of representations and have a number of more restricted special forms. They are applied e.g. in XOR-satisfiability.

The number of distinct m-by-n binary matrices is equal to 2^mn, and is thus finite.

Lattice

Let n and m be given and let U denote the set of all logical m × n matrices. Then U has a partial order given by

\forall A,B\in U,\quad A\leq B\quad {\text{when}}\quad \forall i,j\quad A_{ij}=1\implies B_{ij}=1.

In fact, U forms a Boolean algebra with the operations and & or between two matrices applied component-wise. The complement of a logical matrix is obtained by swapping all zeros and ones for their opposite.

Every logical matrix $A = (A ij)$ has a transpose $A T = (A ji).$ Suppose A is a logical matrix with no columns or rows identically zero. Then the matrix product, using Boolean arithmetic, $A^{\operatorname {T} }A$ contains the m × m identity matrix, and the product $AA^{\operatorname {T} }$ contains the n × n identity.

As a mathematical structure, the Boolean algebra U forms a lattice ordered by inclusion; additionally it is a multiplicative lattice due to matrix multiplication.

Every logical matrix in U corresponds to a binary relation. These listed operations on U, and ordering, correspond to a calculus of relations, where the matrix multiplication represents composition of relations.^[3]

Logical vectors

Group-like structures
	Total	Associative	Identity	Divisible	Commutative
Partial magma	Unneeded	Unneeded	Unneeded	Unneeded	Unneeded
Semigroupoid	Unneeded	Required	Unneeded	Unneeded	Unneeded
Small category	Unneeded	Required	Required	Unneeded	Unneeded
Groupoid	Unneeded	Required	Required	Required	Unneeded
Commutative Groupoid	Unneeded	Required	Required	Required	Required
Magma	Required	Unneeded	Unneeded	Unneeded	Unneeded
Commutative magma	Required	Unneeded	Unneeded	Unneeded	Required
Quasigroup	Required	Unneeded	Unneeded	Required	Unneeded
Commutative quasigroup	Required	Unneeded	Unneeded	Required	Required
Unital magma	Required	Unneeded	Required	Unneeded	Unneeded
Commutative unital magma	Required	Unneeded	Required	Unneeded	Required
Loop	Required	Unneeded	Required	Required	Unneeded
Commutative loop	Required	Unneeded	Required	Required	Required
Semigroup	Required	Required	Unneeded	Unneeded	Unneeded
Commutative semigroup	Required	Required	Unneeded	Unneeded	Required
Associative quasigroup	Required	Required	Unneeded	Required	Unneeded
Commutative-and-associative quasigroup	Required	Required	Unneeded	Required	Required
Monoid	Required	Required	Required	Unneeded	Unneeded
Commutative monoid	Required	Required	Required	Unneeded	Required
Group	Required	Required	Required	Required	Unneeded
Abelian group	Required	Required	Required	Required	Required

If m or n equals one, then the m × n logical matrix (m_ij) is a logical vector or bit string. If m = 1, the vector is a row vector, and if n = 1, it is a column vector. In either case the index equaling 1 is dropped from denotation of the vector.

Suppose $(P_{i}),\,i=1,2,\ldots ,m$ and $(Q_{j}),\,j=1,2,\ldots ,n$ are two logical vectors. The outer product of P and Q results in an m × n rectangular relation

m_{ij}=P_{i}\land Q_{j}.

A reordering of the rows and columns of such a matrix can assemble all the ones into a rectangular part of the matrix.^[4]

Let h be the vector of all ones. Then if v is an arbitrary logical vector, the relation R = v h^T has constant rows determined by v. In the calculus of relations such an R is called a vector.^[4] A particular instance is the universal relation $hh^{\operatorname {T} }$ .

For a given relation R, a maximal rectangular relation contained in R is called a concept in R. Relations may be studied by decomposing into concepts, and then noting the induced concept lattice.

Consider the table of group-like structures, where "unneeded" can be denoted 0, and "required" denoted by 1, forming a logical matrix $R.$ To calculate elements of $RR^{\operatorname {T} }$ , it is necessary to use the logical inner product of pairs of logical vectors in rows of this matrix. If this inner product is 0, then the rows are orthogonal. In fact, small category is orthogonal to quasigroup, and groupoid is orthogonal to magma. Consequently there are zeros in $RR^{\operatorname {T} }$ , and it fails to be a universal relation.

Row and column sums

Adding up all the ones in a logical matrix may be accomplished in two ways: first summing the rows or first summing the columns. When the row sums are added, the sum is the same as when the column sums are added. In incidence geometry, the matrix is interpreted as an incidence matrix with the rows corresponding to "points" and the columns as "blocks" (generalizing lines made of points). A row sum is called its point degree, and a column sum is the block degree. The sum of point degrees equals the sum of block degrees.^[5]

An early problem in the area was "to find necessary and sufficient conditions for the existence of an incidence structure with given point degrees and block degrees; or in matrix language, for the existence of a (0, 1)-matrix of type v × b with given row and column sums".^[5] This problem is solved by the Gale–Ryser theorem.

Notes

^ Petersen, Kjeld (February 8, 2013). "Binmatrix". Retrieved August 11, 2017.
^ O'Neil, Patrick E.; O'Neil, Elizabeth J. (1973). "A Fast Expected Time Algorithm for Boolean Matrix Multiplication and Transitive Closure". Information and Control. 22 (2): 132–8. doi:10.1016/s0019-9958(73)90228-3. — The algorithm relies on addition being idempotent, cf. p.134 (bottom).
^ Copilowish, Irving (December 1948). "Matrix development of the calculus of relations". Journal of Symbolic Logic. 13 (4): 193–203. doi:10.2307/2267134. JSTOR 2267134.
^ ^a ^b Schmidt, Gunther (2013). "6: Relations and Vectors". Relational Mathematics. Cambridge University Press. p. 91. doi:10.1017/CBO9780511778810. ISBN 978-0-511-77881-0.
^ ^a ^b E.g., see Beth, Thomas; Jungnickel, Dieter; Lenz, Hanfried (1999). "I. Examples and basic definitions". Design Theory. Encyclopedia of Mathematics and its Applications. Vol. 69 (2nd ed.). Cambridge University Press. p. 18. doi:10.1017/CBO9780511549533.001. ISBN 978-0-521-44432-3.

References

Brualdi, Richard A. (2006). "Combinatorial Matrix Classes". Encyclopedia of Mathematics and its Applications. Vol. 108. Cambridge University Press. doi:10.1017/CBO9780511721182. ISBN 978-0-521-86565-4.
Brualdi, Richard A.; Ryser, Herbert J. (1991). "Combinatorial Matrix Theory". Encyclopedia of Mathematics and its Applications. Vol. 39. Cambridge University Press. doi:10.1017/CBO9781107325708. ISBN 0-521-32265-0.
Botha, J.D. (2013), "31. Matrices over Finite Fields §31.3 Binary Matrices", in Hogben, Leslie (ed.), Handbook of Linear Algebra (Discrete Mathematics and Its Applications) (2nd ed.), Chapman & Hall/CRC, doi:10.1201/b16113, ISBN 978-0-429-18553-3
Kim, Ki Hang (1982), Boolean Matrix Theory and Applications, Dekker, ISBN 978-0-8247-1788-9
Ryser, H.J. (1957). "Combinatorial properties of matrices of zeroes and ones". Canadian Journal of Mathematics. 9: 371–7.
Ryser, H.J. (1960). "Traces of matrices of zeroes and ones". Canadian Journal of Mathematics. 12: 463–476. doi:10.4153/CJM-1960-040-0.
Ryser, H.J. (1960). "Matrices of Zeros and Ones" (PDF). Bulletin of the American Mathematical Society. 66: 442–464.
Fulkerson, D.R. (1960). "Zero-one matrices with zero trace" (PDF). Pacific Journal of Mathematics. 10: 831–6.
Fulkerson, D.R.; Ryser, H.J. (1961). "Widths and heights of (0, 1)-matrices". Canadian Journal of Mathematics. 13: 239–255. doi:10.4153/CJM-1961-020-3.
Ford Jr., L.R.; Fulkerson, D.R. (2016) [1962]. "II. Feasibility Theorems and Combinatorial Applications §2.12 Matrices composed of 0's and 1's". Flows in Networks. Princeton University Press. pp. 79–91. doi:10.1515/9781400875184-004. ISBN 9781400875184. MR 0159700.

External links

"Logical matrix", Encyclopedia of Mathematics, EMS Press, 2001 [1994]

[1] Petersen, Kjeld (February 8, 2013). "Binmatrix". Retrieved August 11, 2017.

[2] O'Neil, Patrick E.; O'Neil, Elizabeth J. (1973). "A Fast Expected Time Algorithm for Boolean Matrix Multiplication and Transitive Closure". Information and Control. 22 (2): 132–8. doi:10.1016/s0019-9958(73)90228-3. — The algorithm relies on addition being idempotent, cf. p.134 (bottom).

[3] Copilowish, Irving (December 1948). "Matrix development of the calculus of relations". Journal of Symbolic Logic. 13 (4): 193–203. doi:10.2307/2267134. JSTOR 2267134.

[GS-4] Schmidt, Gunther (2013). "6: Relations and Vectors". Relational Mathematics. Cambridge University Press. p. 91. doi:10.1017/CBO9780511778810. ISBN 978-0-511-77881-0.

[BJL-5] E.g., see Beth, Thomas; Jungnickel, Dieter; Lenz, Hanfried (1999). "I. Examples and basic definitions". Design Theory. Encyclopedia of Mathematics and its Applications. Vol. 69 (2nd ed.). Cambridge University Press. p. 18. doi:10.1017/CBO9780511549533.001. ISBN 978-0-521-44432-3.

[1]

[2]

[3]

[4]

[5]

v t e Matrix classes
Explicitly constrained entries	Alternant Anti-diagonal Anti-Hermitian Anti-symmetric Arrowhead Band Bidiagonal Bisymmetric Block-diagonal Block Block tridiagonal Boolean Cauchy Centrosymmetric Conference Complex Hadamard Copositive Diagonally dominant Diagonal Discrete Fourier Transform Elementary Equivalent Frobenius Generalized permutation Hadamard Hankel Hermitian Hessenberg Hollow Integer Logical Matrix unit Metzler Moore Nonnegative Pentadiagonal Permutation Persymmetric Polynomial Quaternionic Signature Skew-Hermitian Skew-symmetric Skyline Sparse Sylvester Symmetric Toeplitz Triangular Tridiagonal Vandermonde Walsh Z
Constant	Exchange Hilbert Identity Lehmer Of ones Pascal Pauli Redheffer Shift Zero
Conditions on eigenvalues or eigenvectors	Companion Convergent Defective Definite Diagonalizable Hurwitz-stable Positive-definite Stieltjes
Satisfying conditions on products or inverses	Congruent Idempotent or Projection Invertible Involutory Nilpotent Normal Orthogonal Unimodular Unipotent Unitary Totally unimodular Weighing
With specific applications	Adjugate Alternating sign Augmented Bézout Carleman Cartan Circulant Cofactor Commutation Confusion Coxeter Distance Duplication and elimination Euclidean distance Fundamental (linear differential equation) Generator Gram Hessian Householder Jacobian Moment Payoff Pick Random Rotation Routh-Hurwitz Seifert Shear Similarity Symplectic Totally positive Transformation
Used in statistics	Centering Correlation Covariance Design Doubly stochastic Fisher information Hat Precision Stochastic Transition
Used in graph theory	Adjacency Biadjacency Degree Edmonds Incidence Laplacian Seidel adjacency Tutte
Used in science and engineering	Cabibbo–Kobayashi–Maskawa Density Fundamental (computer vision) Fuzzy associative Gamma Gell-Mann Hamiltonian Irregular Overlap S State transition Substitution Z (chemistry)
Related terms	Jordan normal form Linear independence Matrix exponential Matrix representation of conic sections Perfect matrix Pseudoinverse Row echelon form Wronskian
Mathematics portal List of matrices Category:Matrices